Paper making rubber roller is a rolled product made of metal or other materials as the core, covered with rubber and vulcanized. Widely used in industries such as papermaking, printing and dyeing, film, and printing. What issues should be noted when using?
1. Clean the surface of the paper roll
Cleaning the surface of paper making rubber rollers is a routine operation in the daily production process. If there is dirt on the surface of the roller, try to clean it with a cleaning solvent such as alcohol or water that does not damage the rubber surface. If not cleaned for a long time, the surface of the rubber roller will be uneven, with the lighter side affecting its use and the heavier side causing damage to related materials and equipment.
2. Bearing lubrication
Paper making rubber roller bearings are divided into two end linkage and two-layer linkage. Whether the bearing is covered with oil or the bearing itself, maintaining good lubrication of the bearing can avoid the risk of damaging the roller surface due to increased running resistance of the bearing. If the roller surface is damaged due to a lack of lubrication in the bearing, special attention should be paid when using liquid silicone rubber surface products, as liquid silicone rubber is fragile and prone to rupture under pressure changes.
The above are the precautions when using paper making rubber rollers, which can be used as a reference. It is used for squeezing, pressing, and calendering different parts of the paper machine.
Editor: Nancy
