The stable temperature and humidity of textile rollers are key to spinning production and quality control. Textile enterprises have strict control standards for temperature and humidity. But few textile companies attach importance to the treatment of rubber rollers and rubber rings at room temperature and humidity. Spinning management affects spinning quality. So, what is the control of the processing room environment by textile rubber rollers and rubber rings?
The temperature and humidity in the rubber roller and rubber ring processing workshops of many textile enterprises are far different from those in spinning mills. During the processing and storage of textile rubber rollers and rubber rings, due to temperature changes, the rubber rollers and rubber rings will rapidly expand or contract. The looseness of the rubber roller and rubber ring will not affect the service life of the rubber roller and rubber ring. When the indoor temperature of the rubber roller and rubber ring processing room is below 20, the shrinkage of the textile rubber roller and rubber ring will cause entanglement, deformation, cracking, cracking, and detachment, thereby shortening the service life of the rubber roller and rubber ring. Similarly, if the relative humidity of the rubber roller and rubber ring processing room is below 20%, it will cause a large amount of static electricity to be generated in the rubber roller and rubber ring, resulting in the phenomenon of rolling the roller and rubber ring; When the relative humidity of the rubber roller and rubber ring processing room exceeds 65%, due to the increased moisture absorption on the surface of the rubber roller and rubber ring, the dehydration of the rubber roller and rubber ring leads to the absorption of fibers and large-area winding rollers, which seriously affects the smooth progress of spinning production, causing fluctuations in various physical indicators of the yarn and a large increase in various yarn defects. Controlling the temperature of the textile rubber roller and rubber ring processing room at 20-36 degrees Celsius and the relative humidity at 20% -65% is not only beneficial for the processing and storage of rubber rollers and rubber rings, but also for the processed rubber rollers and rubber rings. Adapt to the temperature and humidity of the textile workshop in a short period of time to ensure stable production.
In addition to temperature and humidity, water, oil, and paint can also affect the handling of rubber rollers and gaskets. Usually, we find that after cleaning the rubber rollers and rubber rings, a large amount of water droplets or water will appear on the surface of the rollers, rubber rings, and bearings. Drying or drying within a certain period of time can prevent the accumulation of textile rollers and rubber rings. Rust in water or bearings. During the rubber ring processing, the rubber roller bearings need to be oiled. Due to human or grease factors, rubber roller bearings often experience oil leakage and oil leakage. Even if some simple treatment methods involve oil leakage or seepage, there will still be a large amount of oil leakage during the spinning process, resulting in contamination of the roller, rubber roller rubber ring, upper and lower needles, and threads, as well as entanglement of the roller and textile rubber roller rubber ring. Oil often seeps into the rubber ring, making it difficult to clean. The use of coated rubber rollers and rubber rings to deal with the relatively poor environment and processing technology of indoor textile enterprises involves rubber rollers, peeling coatings, coatings, and contaminated yarns, which can lead to rotation management and quality issues. Serious injury. Therefore, the textile rubber roller and rubber ring processing room needs to strictly follow the standard principles of cleanliness and freshness. The rubber roller tray, rubber ring container, and rubber roller and rubber ring storage container in the rubber roller and rubber ring processing room need to be cleaned to ensure that there is no oil, rust, lint, or dust.
The above is the control of the processing room environment by textile rubber rollers and rubber rings. To ensure that production and quality are not affected, it is necessary to have spare ink rollers, but do not store too much to avoid aging. The storage environment for rubber rollers is the same as that for rubber blankets. In addition, the rubber roller should be placed flat at the neck of the shaft, and the surface should not come into contact with each other or other objects to avoid deformation of the rubber roller.
Editor: Chihiro
